Synthetic Pre Filters |
| Carbon Filters | Synthetic Pre Filters | Fine Filters | Hepa Filters |
|
| FEATURES | |
 |
Synthetic non woven media sandwitched in tough synthetic neting |
|
Media supported on metal rods for rigidity |
|
Washable with water and liquid soap |
|
Micron Rating Range 5 to 25 micron |
|
Standard 10 micron 90% (BS:2831) |
|
Media, Fire retardent and resistant to moisture, Fungi, Bacteria & Frost |
|
Recommended as prefilter to fine/ Hepa filter |
|
Type tested as per |
 BS-6540 /
Ashrae-52-76 / ENN-779 |
|
SPECIFICATION OF STANDARD MODELS : Efficiency : Average Arrestance 65% - 80% (Ashrae 52.1/EN 779) Pressure drop : less than 5.0 mm WC at face velocity 2.5m/sec.
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Specify all parameters otherwise product with
standard parameters will be supplied. |
|||||||||||||||||||||||||||
| PARAMETERS | STANDARD | OPTIONS |
| Housing Material | G.I. | Aluminium, S.S., M.S. |
| Sheet Thickness | 0.8 mm | 0.8 ~ 1.6 mm |
| Frame Finish | Galvanised | Epoxy Coated, Anodised, Paint |
| Filter Thickness | 50 mm | 25 to 305 mm |
| Filter Media | Synthetic non-woven between syn. netting | Multi layered synthetic
netting, GI mesh, knitted mesh, etc. |
| Filter Class | EU-2/G2 | EU-2/ G2 to EU-4/ G4 |
| Flange Location | None | Air Entry, Air Exit, Both sides |
| Gasket Location | None | Air Entry, Air Exit, Both sides |
| Gasket Material | N.A. | Felt, Synthetic Rubber |
| Sealing | Foam | Adhesive Sealant |
|
 |
 |
 |
 |
 |
